Оценка эффективности 2D графеновых структур, полученных из различных биополимеров, как модификаторов свойств пленок термостойкого полиимида

Проведена сравнительная оценка влияния 2D графеновых структур, полученных из лигнина, крахмала и целлюлозы методом самораспространяющегося высокотемпературного синтеза, на механические, термические и электрические свойства плёнок поли-4,4’-оксидифениленпиромеллитимида. Обнаружено, что введение синтезированных наночастиц позволяет модифицировать механические свойства полиимидного материала без значительного снижения удельного объёмного и поверхностного сопротивления. Также были установлены и проанализированы зависимости изменения свойств нанокомпозитных пленочных материалов от различных факторов: типа биополимера, из которого был получен нанонаполнитель; морфометрических параметров приготовленного наноразмерного материала и концентрации нанонаполнителя.

1. Bessonov M.I., Koton M.M., Kudryavtsev V.V. Laius L.A. Polyimides – Thermally Stable Polymers. New York: Plenum Publishing Corp., 1987, 374 p.

2. Ha C.-S., Mathews A.S. Polyimides and high performance organic polymers. Advanced Functional Materials, 2011, P. 1–36.

3. Sezer Hicyilmaz A., Celik Bedeloglu A. Applications of polyimide coatings: a review. SN Applied Sciences, 2021, 3 (3), P. 1–22.

4. Paul D.R., Robeson L.M. Polymer nanotechnology: nanocomposites. Polymer, 2008, 49 (15), P. 3187–3204.

5. Jabeen S., Kausar A., Muhammad B., Gul S., Farooq M. A review on polymeric nanocomposites of nanodiamond, carbon nanotube, and nanobifiller: structure, preparation and properties. Polymer-Plastics Technology and Engineering, 2015, 54 (13), P. 1379–1409.

6. Rizvanova P.G., Magomedov G.M., Kozlov G.V., Dolbin I.V. Local and spatial structure of nanofiller in polymer matrix and its influence on the properties of nanocomposites. Inorganic Materials: Applied Research, 2020, 11, P. 665–668.

7. Khlebtsov B.N. Functional nanoparticles: synthesis and practical applications. Colloid Journal, 2023, 85 (4), P. 475–478.

8. Gudkov M.V., Stolyarova D.Y., Shiyanova K.A., Mel’nikov V.P. Polymer composites with graphene and its derivatives as functional materials of the future. Polymer Science, Series C, 2022, 64 (1), P. 40–61.

9. Larin S.V., Glova A.D., Serebryakov E.B., Nazarychev V.M., Kenny J.M., Lyulin S.V. Influence of the carbon nanotube surface modification on the microstructure of thermoplastic binders. RSC advances, 2015, 5 (64), P. 51621–51630.

10. Lyulin S.V., Larin S.V., Nazarychev V.M., Fal’kovich S.G. Kenny J.M. Multiscale computer simulation of polymer nanocomposites based on thermoplastics. Polymer Science, Series C, 2016, 58, P. 2–15.

11. Falkovich S.G., Nazarychev V.M., Larin S.V., Kenny J.M., Lyulin S.V. Mechanical properties of a polymer at the interface structurally ordered by graphene. The Journal of Physical Chemistry C, 2016, 120 (12), P. 6771–6777.

12. Akinwande D., Brennan C.J., Bunch J.S., Egberts P., Felts JR, Gao H, et al. A review on mechanics and mechanical properties of 2D materials – Graphene and beyond., Extreme Mechanics Letters. Elsevier Ltd, 2017, 13, P. 42–77.

13. Saha J.K., Dutta A. A review of graphene: material synthesis from biomass sources, waste and biomass valorization. Springer Netherlands, 2022, 13, P. 1385–1429.

14. Fazil S., Bangesh M., Rehman W., Liaqat K., Saeed S., Sajid M., Waseem M., Shakeel M., Bibi I., Guo C.Y. Mechanical, thermal, and dielectric properties of functionalized graphene oxide/polyimide nanocomposite films. Nanomaterials and Nanotechnology, 2019, 9, P. 1–8.

15. Huang T., Xin Y., Li T., Nutt S., Su C., Chen H., Liu P., Lai Z. Modified graphene/polyimide nanocomposites: reinforcing and tribological effects. ACS applied materials & interfaces, 2013, 5 (11), P. 4878–4891.

16. Li D., Yang W., Chen Y., Xiao C., Wei M. Effect of modified graphene on thermal, mechanical and tribological performance of polyimide based composites. Materials Research Express, 2018, 5 (6), 065304.

17. Ogbonna V.E., Popoola P.I., Popoola O.M., Adeosun S.O. A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: Challenges and recommendations for future improvement. Journal of Thermoplastic Composite Materials, 2023, 36 (2), P. 836–865.

18. Liu P, Yao Z, Zhou J. Mechanical, thermal and dielectric properties of graphene oxide/polyimide resin composite. High Performance Polymers, 2016, 28 (9), P. 1033–1042.

19. Tayouri M.I., Estaji S., Mousavi S.R., Salkhi Khasraghi S., Jahanmardi R., Nouranian S., Arjmand M., Khonakdar H.A. Degradation of polymer nanocomposites filled with graphene oxide and reduced graphene oxide nanoparticles: A review of current status. Polymer Degradation and Stability, 2022, 206, 110179.

20. Voznyakovskii A, Vozniakovskii A, Kidalov S. New way of synthesis of few-layer graphene nanosheets by the self-propagating high-temperature synthesis method from biopolymers. Nanomaterials, 2022, 12 (4), 657.

21. Neverovskaya A.Y., Voznyakovskii A.P., Krupskaya L.T., Shugalei I.V., Vozniakovskii A.A. Conifer Bark as a Precursor of 2D Graphene Structures: Synthesis and Application. Russian Journal of General Chemistry, 2023, 93 (13), P. 3474–3482.

22. Voznyakovskii A.P., Karmanov A.P., Neverovskaya A.Y., Vozniakovskii A.A., Kocheva L.S., Kidalov S.V. Biomass of Sosnowsky’s hogweed as raw material for obtaining 2d carbonic nanostructures. Russian Journal of Bioorganic Chemistry, 2021, 47 (7), P. 1381–1388.

23. Merzhanov A.G. The chemistry of self-propagating high-temperature synthesis. Journal of Materials Chemistry, 2004, 14 (12), P. 1779–1786.

24. Zaaba N.I., Foo K.L., Hashim U., Tan S.J., Liu W.W., Voon C.H. Synthesis of graphene oxide using modified hummers method: solvent influence. Procedia Engineering, 2017, 184, P. 469–477.

25. Stone A.J., Wales D.J. Theoretical studies of icosahedral C60 and some related species. Chemical Physics Letters, 1986, 128 (5–6), P. 501–503.

26. Kuntsman I., Nikolaeva A., Didenko A., Vlasova E., Ivan’kova E., Gofman I., Larin S. The role of carbon nanofillers in the aging processes of polyimide composites. Journal of Polymer Research, 2025, 32 (6), 223.

27. Nikolaeva A.L., Bugrov A.N., Sokolova M.P., Ivan’kova E.M., Abalov I.V., Vlasova E. N., Gofman I.V. Metal oxide nanoparticles: an effective tool to modify the functional properties of thermally stable polyimide films. Polymers, 2022, 14 (13), 2580.

28. Voznyakovskii A.P., Neverovskaya A.Y., Gorelova E.V., Zabelina A.N. Facile synthesis of 2D carbon structures as a filler for polymer composites. Nanosystems: Physics, Chemistry, Mathematics, 2018, 9 (1), P. 125–128.

29. Richardson S., Gorton L. Characterisation of the substituent distribution in starch and cellulose derivatives. Analytica Chimica Acta, 2003, 497 (1– 2), P. 27–65.

30. Li J., Li Y., Wu Y., Zheng M. A comparison of biochars from lignin, cellulose and wood as the sorbent to an aromatic pollutant. Journal of hazardous materials, 2014, 280 (15), P. 450–457.

31. Podlozhnyuk N., Vozniakovskii A., Kidalov S., Voznyakovskii A. Performance properties of epoxy resin modified with few-layer graphene obtained by the method of self-propagating high-temperature synthesis. Polymers, 2025, 17 (6), 812.

32. Huang L., Zhang D., Zhang F.H., Feng Z.H., Huang Y.D., Gan Y. High-contrast SEM imaging of supported few-layer graphene for differentiating distinct layers and resolving fine features: there is plenty of room at the bottom. Small, 2018, 14 (22), 1704190.

33. Kim J., Kim F., Huang J. Seeing graphene-based sheets. Materials Today, 2010, 13 (3), P. 28–38.

34. Scardaci V., Compagnini G. Raman spectroscopy investigation of graphene oxide reduction by laser scribing. Journal of Carbon Research, 2021, 7 (2), 48.

35. Johra F.T., Lee J.W., JungW.G. Facile and safe graphene preparation on solution based platform. Journal of Industrial and Engineering Chemistry, 2014, 20 (5), P. 2883–2887.

36. Stobinski L., Lesiak B., Malolepszy A., Mazurkiewicz M., Mierzwa B., Zemek J., Jiricek P., Bieloshapka I. Graphene oxide and reduced graphene oxide studied by the XRD, TEM and electron spectroscopy methods. Journal of Electron Spectroscopy and Related Phenomena, 2014, 195, P. 145–154.

37. Buhler K-U. Spezialplaste. Berlin: Academie. Verlag, 1978, 1015 p.

38. Ioni Y.V., Sapkov I.V., Chentsov S.I., Efremova E.I., Gubin S.P. New method for preparation of composite based on montmorillonite and graphene oxide. Russian Journal of Inorganic Chemistry, 2023, 68 (4), P. 487–495.

39. Gofman I.V., Abalov I.V., Yudin V.E., Tiranov V.G. Mechanical and thermal properties of nanocomposite films based on an aromatic polyimide and carbon nanocones. Physics of the Solid State, 2011, 53, P. 1509–1515.

40. Kamalov A., Didenko A., Ivanov A., Kodolova-Chukhontseva V., Terebova N., Ivan’kova E., Popova E., Yudin, V. Effect of the rigidity of polyimide matrices on the electrical conductivity of graphene-containing composites. Journal of Polymer Research, 2025, 32 (1), P. 1–13.

41. Smirnova V.E., Gofman I.V., Ivan’kova E.M., Didenko A.L., Krestinin A.V., Zvereva G.I., Yudin V.E.. Effect of single-walled carbon nanotubes and carbon nanofibers on the structure and mechanical properties of thermoplastic polyimide matrix films. Polymer Science Series A, 2013, 55, P. 268–278.

42. Guadagno L., De Vivo B., Di Bartolomeo A., Lamberti P., Sorrentino A., Tucci V., Vertuccio L., Vittoria V. Effect of functionalization on the thermo-mechanical and electrical behavior of multi-wall carbon nanotube/epoxy composites. Carbon, 2011, 49 (6), P. 1919–1930.