Preview

Nanosystems: Physics, Chemistry, Mathematics

Advanced search

Superhydrophobic coatings using nanomaterials for anti-frost applications – review

https://doi.org/10.17586/2220-8054-2016-7-4-650-656

Abstract

Frost formation and accretion on various outdoor structures like aircraft, wind turbines, heat exchanger coils etc. as well as on glass doors of indoor refrigerators is a serious issue as it presents economic as well as safety challenges. Most of the research done on anti-frost coatings is based on the theme of making the surface super hydrophobic (contact angle > 150 °, Sliding angle < 10 °) mimicking a lotus leaf which provides low or zero ice adhesion. Nanomaterials have played a significant role in such coatings as they help in tuning the surface properties which are surface roughness and surface energy. In this paper, we have tried to investigate why all superhydrophobic surfaces may not be ice-phobic and how nanomaterials improve super hydrophobicity of the surface, in turn, making them anti-frosting. This paper is a detailed study of anti-frosting strategies based on nanosystems which have been developed to date.

About the Authors

S. V. Laturkar
Institute of Chemical Technology
India

Department of Polymer and Surface Engineering

Matunga, Mumbai, 400019



P. A. Mahanwar
Institute of Chemical Technology
India

Department of Polymer and Surface Engineering

Matunga, Mumbai, 400019



References

1. Zhongliang L., Hongyan W., Xinhua Z. An experimental study on minimizing frost deposition on a cold surface under natural convection conditions by use of a novel anti-frosting paint. Part I. International Journal of Refrigeration, 2006, 29, P. 229–236.

2. Puri B.R., Sharma L.R., Pathania M.S. Principles of Physical Chemistry. Vishal publications, Jalandhar, 2002, 281 p.

3. Gent R.W., Dart N.P., Cansdale J.T. Aircraft icing. Phil. Trans. R. Soc. Lond. A, 2000, 358, P. 2873–2911.

4. Botta G., Cavaliere M., Holttinen H. Ice accretion at acqua spruzza and its effects on wind turbine operation and loss of energy production. BOREAS IV, 1998, 31 March – 2 April, Hetta, Finland, P. 77–86.

5. Huang Lingyan, Zhongliang Liu, et al. Experimental Study on Frost Release on Fin-and-Tube Heat Exchangers by Use of a Novel Anti-Frosting Paint. Experimental Thermal and Fluid Science, 2009, 33 (7), P. 1049–1054.

6. Dalili N., Edrisy A., Carriveau R. A Review of Surface Engineering Issues Critical to Wind Turbine Performance. Renewable and Sustainable Energy Reviews, 2009, 13, P. 428–438.

7. Ostin R., Johannesson G. A Polymeric Approach to Counteract Frosting in Air-to-Air Heat Exchangers. Heat Recovery Syst. CHP, 1991, 11 (5), P. 415–421.

8. Li X.M., Reinhoudt D. What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces. Chem. Soc. Rev., 2007, 36, P. 1350–1368.

9. Feng L., Zhang Y., Xi J., Zhu Y. Petal effect: A superhydrophobic state with high Adhesive force. Langmuir, 2008, 24 (8), P. 4114–4119.

10. Hejazi V., Sobolev K., Nosonovsky M. From Superhydrophobicity to Icephobicity: Forces and Interaction Analysis. Scientific reports, 2013, 3, P. 2194.

11. Kulinich S.A., Farzaneh M. On Ice-Releasing Properties of Rough Hydrophobic Coatings. Cold Regions Science and Technology, 2011, 65 (1), P. 60–64.

12. Fu Q., Kumar D., et al. Development of sol-gel icephobic coatings: effect of surface roughness and surface energy. ACS Applied Materials and Interfaces, 2014, 6, P. 20685–20692.

13. Sohn Y., Kim D., Lee S., Yin M. Anti-frost coatings containing carbon nanotube composite with reliable thermal cyclic property. Journal of Materials Chemistry A, 2014, 2, P. 11465–11471.

14. He M., Wang J., Li H., Song Y. Super-hydophobic surfaces to condensed micro-droplets at temperatures below the freezing point retard ice/frost formation. The Royal Society of Chemistry, 2011, 7, P. 3393–4000.

15. Wang H., Tang L., Wu X., Dai W. Fabrication and anti-frosting performance of supehydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate. Applied Surface Science, 2007, 253, P. 8818–8824.

16. Huang Y., Hu M., et al. Preparation and characterisation of silica/fluorinated acrylate copolymers hybrid films and the investigation of their icephobicity. Thin Solid Films, 2012, 520, P. 5644–5651.

17. Lee H., Alcaraz M., Rubner M.F., Cohen R.E. Zwitter-wettability and anti-fogging coatings with frost resisting capabilities. ACS NANO, 2013, 7 (3), P. 2172–2185.

18. Tong W., Tong A. Anti-frost and energy saving transparent glass windows manipulated through solar absorbing metamaterial coatings. Global Advanced Research, Journal of Engineering, Technology and Innovation, 2015, 4 (3), P. 31–40.

19. Kim A., Lee C., Kim H., Kim J. Simple approach to superhydrophobic nanostructured Al for practical anti-frosting applications based on Enhanced self-propelled jumping droplets. ACS Applied Materials and Interfaces, 2015, 7, P. 7206–7213.

20. Jung S., Dorrestjin M., et al. Are superhydrophobic surfaces best for icephobicity? Langmuir, 2011, 27, P. 3059–3066.

21. Wong T.S., Kang S.H., et al. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature, 2011, 477, P. 443–447.

22. Kim P., Wong T.S., Alvarenga J., Kreder M.J. Liquid infused nanostructure surfaces with extreme anti-ice and anti-frost performance. ACS NANO, 2012, 6 (8), P. 6569–6577.

23. Liu Q., Wang Y., et al. Durability of a lubricant infused electrospray silicon rubber surface as an anti-icing coating. Applied Surface Science, 2015, 346, P. 68–76.

24. Chanda J., Lonow L., Kirillova A., Synytska A. New insight into icing and de-icing properties of hydrophobic and hydrophillic structured surfaces based on core-shell particles. Soft matter, 2015, 11, P. 9126–9134.


Review

For citations:


Laturkar S.V., Mahanwar P.A. Superhydrophobic coatings using nanomaterials for anti-frost applications – review. Nanosystems: Physics, Chemistry, Mathematics. 2016;7(4):650-656. https://doi.org/10.17586/2220-8054-2016-7-4-650-656

Views: 10


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2220-8054 (Print)
ISSN 2305-7971 (Online)